VISYNEXTalk to an engineer
Industries

Synthetic defect data by manufacturing process

Defects follow the process, so we start there.

We don’t organise by industry. A bracket for a car and a bracket for a washing machine fail the same way if they’re cut the same way. What matters is how your part is made.

These are the defects typically associated with each process. They’re the starting point for the classes we propose for your part, not a fixed menu. The classes for your part come from your process, your photograph and what your inspectors reject.

Cut sheet metal: laser, plasma, waterjet

We’ve made these before: dross on the cut edge, heat tint beside it, striations along the cut face, and scratches. Burrs and edge chipping on coated sheet are on request, attempted, not guaranteed.

Classes derived from the photograph shown belowdross adhesion, heat affected zone (HAZ) discoloration, edge roughness, surface scratch

  • Dross on the cut edge, generated on part 7566FDross on the cut edge
  • Heat tint beside the cut, generated on part 7566FHeat tint beside the cut
  • Striations along the cut face, generated on part 7566FStriations along the cut face

Generated on our own part, 7566F, laser-cut stainless steel. Real pipeline output, cropped.

Reference image of a laser-cut steel bracket, no defect
The photograph
surface scratch on a laser-cut steel bracket, synthetic defect image
surface scratch, synthetic, from one photograph
heat affected zone (HAZ) discoloration on a laser-cut steel bracket, synthetic defect image
heat affected zone (HAZ) discoloration, synthetic, from one photograph
Edge Roughness/Striations on a laser-cut steel bracket, synthetic defect image
Edge Roughness/Striations, synthetic, from one photograph

The photograph of our own part, then images generated from it, whole.

Castings

Porosity open to the surface, cold shuts, misruns, inclusions, flash at the parting line.

Classes derived from the reference image shown firstCasting Porosity, Casting Porosity/Voids, Casting Inclusions

Reference image of a cast and machined bearing housing, no defectThe reference image
Casting Inclusions on a cast and machined bearing housing, synthetic defect imageDelivered
Casting Inclusions, synthetic, from one reference image

Generated from the reference image shown first.

Machined parts

Tool marks, chatter, burrs on edges and holes, handling scratches and dents, and finish defects where the part is coated after machining.

Classes derived from the reference image shown firstMachining Marks, Burrs, Machining Burrs, Tool Marks/Chatter, Surface Roughness (Housing)

Reference image of a cast and machined bearing housing, no defect
The reference image
Machining Burrs on a cast and machined bearing housing, synthetic defect image
Machining Burrs, synthetic, from one reference image

Generated from the reference image shown first.

Injection-moulded parts

Short shots, sink marks, flash, weld lines, burn marks, surface contamination.

Classes derived from the reference image shown firstFlash/Burrs, Sink Marks, Weld Lines (Knit Lines), Short Shots, Flow Marks (Streaks), Discoloration/Color Streaks, Scratches/Scuffs

Reference image of an injection-moulded plastic brick, no defect
The reference image
Scratches/Scuffs on an injection-moulded plastic brick, synthetic defect image
Scratches/Scuffs, synthetic, from one reference image
sink mark on an injection-moulded plastic brick, synthetic defect image
sink mark, synthetic, from one reference image
dent on an injection-moulded plastic brick, synthetic defect image
dent, synthetic, from one reference image

Generated from the reference image shown first.

Glass containers

Classes derived from the reference image shown firstSeam Line Flash, Air Bubbles (Glass), Cracks/Checks (Glass), Chips (Glass), Scratches (Glass)

Reference image of a glass sauce bottle, no defect
The reference image
Cracks/Checks (Glass) on a glass sauce bottle, synthetic defect image
Cracks/Checks (Glass), synthetic, from one reference image
Seam Line Flash on a glass sauce bottle, synthetic defect image
Seam Line Flash, synthetic, from one reference image
Scratches (Glass) on a glass sauce bottle, synthetic defect image
Scratches (Glass), synthetic, from one reference image

Generated from the reference image shown first.

Blow-moulded bottles

Classes derived from the reference image shown firstContamination specks, Print misregistration, Label bubbling

Reference image of a blow-moulded plastic bottle, no defect
The reference image
Contamination specks on a blow-moulded plastic bottle, synthetic defect image
Contamination specks, synthetic, from one reference image
Print misregistration on a blow-moulded plastic bottle, synthetic defect image
Print misregistration, synthetic, from one reference image
Label bubbling on a blow-moulded plastic bottle, synthetic defect image
Label bubbling, synthetic, from one reference image

Generated from the reference image shown first.

Extruded rubber hose

Classes derived from the reference image shown firstMolding flash, Mandrel kink, Insufficient crimp

Reference image of an extruded rubber coolant hose, no defect
The reference image
Molding flash on an extruded rubber coolant hose, synthetic defect image
Molding flash, synthetic, from one reference image
Mandrel kink on an extruded rubber coolant hose, synthetic defect image
Mandrel kink, synthetic, from one reference image
Insufficient crimp on an extruded rubber coolant hose, synthetic defect image
Insufficient crimp, synthetic, from one reference image

Generated from the reference image shown first.

Electronics assembly

Classes derived from the reference image shown firstPuncture or dent, Pouch swelling, Adhesive liner misalignment, Print smudge

Reference image of a pouch battery cell, no defect
The reference image
Puncture or dent on a pouch battery cell, synthetic defect image
Puncture or dent, synthetic, from one reference image
Pouch swelling on a pouch battery cell, synthetic defect image
Pouch swelling, synthetic, from one reference image
Adhesive liner misalignment on a pouch battery cell, synthetic defect image
Adhesive liner misalignment, synthetic, from one reference image

Generated from the reference image shown first.

Food & beverage

Classes derived from the reference image shown firstbruising, scab/fungal spot, insect damage, stem breakage/loss, sunscald

Reference image of an apple, no defect
The reference image
scab/fungal spot on an apple, synthetic defect image
scab/fungal spot, synthetic, from one reference image
sunscald on an apple, synthetic defect image
sunscald, synthetic, from one reference image

Generated from the reference image shown first.

Aerospace

Classes derived from the reference image shown firstCasting porosity, Edge nicks and burrs, Machining chatter, Brushing unevenness

Reference image of a turbine fan rotor assembly, no defect
The reference image
Casting porosity on a turbine fan blade, synthetic defect image
Casting porosity, synthetic defect image
Edge nicks and burrs on turbine fan blades, synthetic defect image
Edge nicks and burrs, synthetic defect image
Machining chatter on a turbine fan hub, synthetic defect image
Machining chatter, synthetic defect image

Generated from the reference image shown first.

Other processes

Stamped and formed partsBurrs, splits and cracks at bends, wrinkling, die marks.
Coatings and finishes, on any of the aboveUneven or patchy colour, missed areas, chips at edges, rack or contact marks, burning (anodise).

What a photograph can’t show, whatever the process

Dimensional errors, internal flaws, and anything on a face the camera doesn’t see.

If your rejects are mostly measured with a gauge, this isn’t the right tool for those classes, and we’ll tell you.

Where we’ve run it

We’ve generated defect data across ten industries and processes, from laser-cut sheet metal and castings to glass containers and fresh produce. Each of those ten sections above shows the reference image we started from, then the synthetic defect images generated from it.

Tell us how your part is made.

For the engineer

Try it on your own part

Sign in with your work email, upload one photograph of a good part, and get up to 10 images of it back, labelled in YOLO and COCO. Each takes about a minute. Free, once per email address.

Try it free
For whoever signs off

Talk to an engineer

Thirty minutes with someone who built the pipeline. No upload, no account.

Book a call